Intro to Git — Snapshots, Branches & Sharing
WorkshopyOfficial10 stepsQuiz9 interactiveDiagram
gitversion controlbeginners
Facilitation skills training for running workshops: plan openings, ask open questions, use wait time and 1-2-4-All, and decide on five tricky scenarios.

WorkshopyOfficial
78 lessons · used by 2 teachers
Sign in to copy it to your workspace. It’s free.
10 steps · 2 quizzes · open any step, or read it here
In this facilitation skills training you practise running workshops that work: how to open, how to pace, how to ask questions and use silence, and what to do with the quiet and the loud participants. Each skill comes with a scenario you decide on before you see the reasoning.
A presenter's job is to deliver content. A facilitator's job is to get a group to think, decide or learn something together, and to make it easy for every person in the room to take part. The difference shows in who talks.
Try it: switch between the three ways of running the same ten minutes and watch who is talking.
Interactive · Who talks: a lecture, pairs, then a share-out — try it in the lesson
In this lesson you'll:
It takes about an hour. Keep a real workshop or meeting you run in mind: every step ends with something you can change in it.
Takeaway: facilitation is measured by what the group does, not by what you say.
People decide in the first minutes what kind of session this is: one where they sit back, or one where they work. A strong opening does three things, quickly:
What it skips: your full biography, the agenda read aloud item by item, and "Any questions before we start?" when there is nothing yet to ask about.
Try it: build the opening of a half-day workshop on why new customers drop off during onboarding. Decide each part before you read why, and keep it within ten minutes.
Interactive · Build the first ten minutes — try it in the lesson
Takeaway: an opening that names the outcome and gets everyone talking early buys you the rest of the session.
The question you ask decides the answers you can get.
A common slip is to ask an open question and then turn it into a closed one before anyone answers: "What do you think of the form? Is it OK?" The second question is the one people answer.
Try it: ask the same group about the same form three ways and look at what comes back. The answers are illustrative.
Interactive · Same room, three questions: what comes back — try it in the lesson
Questions that open a room up: "What would have to be true for this to work?", "Where would this break for your team?", "What did you notice?", "What's missing from this list?"
Takeaway: ask open questions to learn, closed ones to count or decide, and never lead.
Each question below is one a facilitator asked at work. Decide what kind it is. A question that suggests the answer it wants is leading, even if it is grammatically open.
You ask a good open question. Nobody answers. Most facilitators fill the silence within a second or two: they rephrase, add a hint, or answer it themselves.
The science educator Mary Budd Rowe studied this in school classrooms in the 1960s and 70s. She found that teachers typically waited about one second after a question before speaking again. When teachers learned to wait three seconds or more, students gave longer answers, more of them answered, and fewer said "I don't know". Her studies were with children in science classes, but the reason carries over to adults: people need a few seconds to think, and they don't all need the same few seconds.
Silence after a question feels much longer to you, at the front, than it does to the people who are thinking. Count to five in your head before you say anything.
Try it: set how long you wait, then ask. Each person in this pretend room needs a different time to have an answer ready; the times are illustrative.
Interactive · Wait time: how many people have an answer ready — try it in the lesson
When the silence goes on past ten seconds, it is usually not thinking any more. Then the question was unclear, too big, or risky to answer in public. Rephrase it once, or give people a minute to write before anyone speaks (the next step has a structure for that).
Takeaway: after a question, wait at least three seconds, and count them.
Question 1. What makes a strong purpose line for a workshop's opening?
Question 2. When is a closed question the right one to ask?
Question 3. Which of these is a leading question?
Question 4. In Mary Budd Rowe's classroom studies, what happened when teachers waited three seconds or more after a question?
"Any thoughts?" to a room of twelve gets you the two or three people who always speak first. A structure changes who talks without you having to call on anyone.
From Liberating Structures, a collection of facilitation methods by Henri Lipmanowicz and Keith McCandless. You ask one question, then:
About twelve minutes, and every person has spoken, twice, before the whole group hears anything.
Everyone answers in turn, briefly, and anyone may pass. "One word for how this quarter felt" or "Thirty seconds each: one thing you'd keep." A round gives the quiet person a turn without singling them out, and a time limit keeps the loud one short.
A visible list (a flip chart, a corner of the whiteboard, a shared note) for good points that don't belong right now. Write the point in the person's words, thank them, and say when you'll come back to it. Then come back to it: before the close, go through the list and decide each item (answered, owner and date, or dropped with a reason). A parking lot you never return to teaches the group that you dodge.
Try it: step through 1-2-4-All with a team of twelve and compare how many conversations run at once with an open discussion.
Interactive · 1-2-4-All with twelve people, step by step — try it in the lesson
The "about 4 of 12" in an open discussion is illustrative: count it in your own next meeting.
Takeaway: a structure gives everyone a turn, so you don't have to pick who speaks.
Most groups have people who speak a lot and people who rarely do. Neither is a problem in itself: a quiet person may be thinking hard, and a talkative one may be the only one who did the pre-read. It becomes a problem when the loud voices set the outcome and the quiet ones stop trying.
What works on both sides is usually the same: change the structure, not the person. Writing alone first, pairs before the whole group, and rounds with a time limit give quiet people a turn and keep loud people short, without singling anyone out in public.
Try it: decide what you would do in each scenario first, then read why. Find the strongest move for both.
Interactive · Scenarios: the silent room and the dominant voice — try it in the lesson
Takeaway: change the structure, not the person, and save the personal word for the break.
Three more moments every facilitator meets. They feel different, but the strongest move in each follows the same pattern: name what is happening, then choose on purpose, instead of pushing on as if nothing happened.
Try it: decide first, then read why. Find the strongest move in all three.
Interactive · Scenarios: hostility, low energy and the clock — try it in the lesson
Takeaway: name what is happening, then choose on purpose.
Most workshops run over for the same reasons: the facilitator's explanations grow, activities start late, and the debrief, where the learning is turned into decisions, gets squeezed into the last five minutes.
Three habits help:
During the session, say the time out loud ("We have ten minutes for this"), use a visible timer for activities, and decide what you'll cut before you need to.
Try it: here is a 90-minute workshop plan that doesn't fit. Change the minutes until it does, with spare time and without cutting the group's work below what it needs.
Interactive · Fit a 90-minute workshop to the clock — try it in the lesson
A useful way to cut on the day: mark each block of your plan as must, should or could before the session. When time runs short, the could blocks go first, then the should blocks, and you tell the group what you dropped.
Takeaway: if the plan doesn't fit on paper, it won't fit in the room; cut before you need to.
The close is where a workshop turns into work. Ten minutes are usually enough, and they are the minutes most often lost to an overrun, which is why the pacing step protects them.
A close that works:
Then end on time. A session that ends when it said it would makes the next one easier to fill.
Try it: take one workshop or meeting you will run in the next month and write down, in a few lines:
Takeaway: end with decisions, owners and dates, and end on time.
Question 1. In 1-2-4-All, what is the order of the stages?
Question 2. Why does 1-2-4-All start with a silent minute alone?
Question 3. What is a parking lot for?
Question 4. One participant has answered every question for half an hour, and the others have gone quiet. What is usually the strongest first move?
Question 5. Forty minutes are left and three agenda items remain. What do you do?
Question 6. Which of these help quiet participants contribute? (pick all)
Workshopy shares this lesson under CC BY 4.0. Anyone may use and change it, with credit to you. Anyone can learn it here, free. A copy in your workspace is yours to change and run live; your students never need an account.
Version 1Current
· First published
Copies are made from the current version. A copy you already have doesn’t change.
WorkshopyOfficial10 stepsQuiz9 interactiveDiagram
gitversion controlbeginners
WorkshopyOfficial16 steps2 quizzes15 interactiveDiagram
workshopyproduct touronboarding
WorkshopyOfficial10 steps2 quizzes10 interactive
data-literacystatisticsmean and median
WorkshopyOfficial10 steps2 quizzes9 interactive
ai-teachersformative assessmenthinge questions
WorkshopyOfficial11 steps2 quizzes10 interactive
trainersactive learningpeer instruction
WorkshopyOfficial11 steps2 quizzes10 interactive
trainerstrain the trainerworkshop design
Comments
No comments yet. Be the first to say how it went.